REIN delivers 10000 psi Choke Manifold and SSV for the project in Middle East


REIN delivers 10000 psi Choke Manifold and SSV for the project in Middle East. Due to the high requirements, equipment was tested and certified with PR2 certification. 


10000_psi_Choke_Manifold_and_SSV_for_the_project_in_Middle_East_Rein_well_equipment_02.jpg

10000_psi_Choke_Manifold_and_SSV_for_the_project_in_Middle_East_Rein_well_equipment_03.jpg

Surface Safety Valve


The surface safety valve, in short SSV, is the second item of well test system, exposed to well effluent and serves as an important equipment of ESD system. SSV is an additional safety equipment, which consists of hydraulically or pneumatically actuated gate valve with reverse acting bonnet assembly, connections and skid.  

 

The choke manifold is flow control device used in well testing for reduction and/or control of flow pressure. The choke manifold consists of gate valves, high-pressure fittings, chokes, pressure gauge, connections and skid. The choke manifold is designed based on the operator’s condition, but usually designed as 4- or 5-valve assembly. Chokes, either adjustable or fixed, are used to achieve desired flow rate during testing. 


CONTACT US

If you require any further information,feel free to contact us

We would be glad to provide you immediate technical assistance and cost-effective proposal!

CONTACT BY PHONE

Quick Contact Form


If you have question or inquiry, you may contact us by filling the form below. We will provide you response within 24 hours.

- must be filled